Weatherproof fire protection for concrete

HENSOMASTIK B 3000 (Weather Proof)

Water-based fire protection coating that increases the fire resistance of concrete and reinforced concrete members by up to 120 minutes. Weatherproof to DIN 1048 for indoor and outdoor use, including car parks.
✦ Don't forget
Optional Extras

Add these to your order too.

£360.00
inc. VAT
(£300.0 ex. VAT)
📋
Free project-specific certificate included
Every order includes a bespoke Statement of Performance for your treated area.
Supplied to order
Please allow approximately 10–14 working days for delivery. Delivery charges may vary depending on quantity and location
✓ Supplied to order
📞 Need advice? Call 02920 026582 Mon–Fri 9–4:30
HENSOMASTIK B 3000 (Weather Proof)
£360.00
Product Overview

What is this product?

Important System Requirement:

HENSOMASTIK B 3000 is applied over a primer of BETON-CARBONSPERRE (available separately). The primer must be fully dry before HENSOMASTIK B 3000 is applied.

Weatherproof fire protection for concrete

HENSOMASTIK B 3000 is a water-based fire protection coating that increases the fire resistance of concrete and reinforced concrete members by up to 120 minutes. It is water-pressure resistant and weatherproof in accordance with DIN 1048, and is designed for indoor and outdoor use, including areas with high emission loads such as underground and multi-storey car parks.

It delays heat build-up in the concrete and prevents the concrete from spalling, while adding very little load to the structure and no loss of headroom.

Where it is used

  • Concrete beams, columns and supports
  • Ribbed ceilings (on request, with assessment report)
  • Underground and multi-storey car parks
  • Outdoor and weathered areas, such as garage entrances
  • New construction and refurbishment

Product characteristics

  • Increases fire resistance of concrete by up to 120 minutes, tested to EN 13381-3:2015
  • General building authority approval (abZ) Z-19.11-1715
  • Water-pressure resistant and weatherproof in accordance with DIN 1048
  • Free of halogens, APEO, borates, PFAS, fibres and plasticisers
  • Non-VOC according to ISO 11890-2, VOC emission class A+
  • Maintenance-free, permanently elastic
  • Colour: white (approx. RAL 9010). Other colours with HENSOTOP WB Green top coat on request

Technical data

  • Consumption: 2 kg/m² per 1.0 mm dry film (1.4 mm wet)
  • Dry film thickness 1.313 to 3.435 mm, depending on reinforcement depth and required fire resistance
  • Up to 1,500 µm wet film per pass
  • Dust dry approx. 6 hours, recoatable approx. 12 hours, fully dry approx. 48 hours (at +20°C, 65% relative humidity, 1.0 mm dry film)
  • Airless spray: nozzle 0.025 to 0.031 inch, 200 to 250 bar, output above 5.5 l/min
  • Air temperature at least +10°C, relative humidity below 80%, surface at least 5°C above dew point
  • Supplied in 25 kg plastic pails

Information required for quotation

  • Required fire protection time
  • Total concrete thickness (mm)
  • Depth of reinforcement steel bars in the concrete
  • Total surface area to protect (m²)

Documents

Why choose this product?
  • ✓
    Up to 120 minutes fire resistance for concrete
  • ✓
    Weatherproof and water-pressure resistant to DIN 1048
  • ✓
    Suitable for car parks and areas with high emission loads
  • ✓
    Free of halogens, APEO, borates, PFAS, fibres and plasticisers
  • ✓
    Maintenance-free with no loss of headroom
  • ✓
    Non-VOC, VOC emission class A+
Technical Information

Specifications & Documents

Full technical data and downloadable certification for compliance records.

Finish White (approx. RAL 9010). Other colours with HENSOTOP WB Green top coat on request.
Use Indoor and outdoor
Application Method Airless spray (nozzle 0.025 to 0.031 inch, 200 to 250 bar), brush or roller
Fire Classification Up to 120 minutes fire resistance for concrete members, tested to EN 13381-3:2015
VOC Content Non-VOC according to ISO 11890-2, VOC emission class A+
Shelf Life 12 months unopened
Using This Product

How to Apply

Simple application with standard tools — no specialist equipment required.

  1. 1
    Prepare concrete for HENSOMASTIK B 3000
    The surface must be rough and free of dust, oil, grease, efflorescence and cement laitance. Concrete dry per ASTM D 4263 and/or residual moisture max. 4% (CM method).
  2. 2
    Prime before HENSOMASTIK B 3000
    Apply BETON-CARBONSPERRE primer and let it dry fully before applying HENSOMASTIK B 3000.
  3. 3
    Check conditions for HENSOMASTIK B 3000
    Air temperature at least +10°C, relative humidity below 80%, surface at least 5°C above dew point and always above 0°C. Ventilation and extraction are mandatory.
  4. 4
    Apply HENSOMASTIK B 3000
    Stir with a slow agitator. Airless spray with a 0.025 to 0.031 inch nozzle at 200 to 250 bar, output above 5.5 l/min, with intake hose and filters removed. Max. 1,500 µm wet film per pass. Thin with max. 5% water only if necessary.
  5. 5
    Allow HENSOMASTIK B 3000 to dry
    At +20°C and 65% relative humidity (1.0 mm dry film): dust dry approx. 6 hours, recoatable approx. 12 hours, fully dry approx. 48 hours.
  6. 6
    Top coat HENSOMASTIK B 3000 if required
    HENSOTOP WB can be applied for colour and moisture protection, at least 48 hours after application and after a positive fingernail test.

Coverage Guide

Consumption 2 kg/m² per 1.0 mm dry film
Recoatable approx. 12 hours
Fully dry approx. 48 hours
Common Questions

Frequently Asked Questions

Can't find what you're looking for? Call us on 02920 026582 or use live chat for free expert advice.

HENSOMASTIK B 3000 increases the fire resistance of concrete and reinforced concrete beams, columns and supports by up to 120 minutes. It is designed for indoor and outdoor use, including car parks.

Up to 120 minutes for concrete members, tested to EN 13381-3:2015.

Yes. It is water-pressure resistant and weatherproof according to DIN 1048, and is suitable for outdoor and weathered areas such as garage entrances.

Yes. BETON-CARBONSPERRE is the primer, and it must be fully dry before HENSOMASTIK B 3000 is applied.

2 kg/m² per 1.0 mm dry film. The dry film thickness is 1.313 to 3.435 mm, depending on reinforcement depth and required fire resistance.

At +20°C and 65% relative humidity with 1.0 mm dry film: dust dry approx. 6 hours, recoatable approx. 12 hours, fully dry approx. 48 hours.

White (approx. RAL 9010). Other colours are possible with the HENSOTOP WB Green top coat on request.

The required fire protection time, total concrete thickness, depth of the reinforcement steel bars, and the total surface area to protect.

Customer Reviews

What Our Customers Say

Verified reviews collected via eKomi — independently moderated and genuine.

5.0
★★★★★
Based on 1,039 reviews
eKomi Gold Seal
  • ★★★★★

    Gave them a ring to ask for some advice, was pointed to exactly what I needed and how much. Arrived promptly and has performed perfectly.

    David H.
    Verified purchase · 2 weeks ago
  • ★★★★★

    Very quick response to query and fast delivery. Easy to use product with good instructions. Great company. Will use again.

    Sarah M.
    Verified purchase · 1 month ago
  • ★★★★★

    Excellent product with swift delivery. Easy to top up fire retardancy after the deck was cleaned. Looks completely untreated which was exactly what we wanted.

    Tom R.
    Verified purchase · 1 month ago