For wood and timber, use Flametect C-WD+. For textiles, synthetic or natural, use Flametect Nitro. For natural materials only, such as cotton, linen, wool and paper, use Flametect C. For structural steel and concrete, use intumescent paints.

Not sure? Contact us and we will advise.

Yes. Flametect C and Flametect Nitro are water-based, contain zero VOCs, no halogens and no formaldehyde. They are classified as non-hazardous.

Yes. All products are manufactured in an ISO 9001 environment. Performance is verified by independent UKAS and UL laboratories in the UK, USA and Germany.

We evaluate materials for treatment suitability free of charge. Send us a sample or description and we will advise on the best product. Final certification tests should be performed by a UKAS facility.

Yes. Most customers apply Flametect products themselves using basic equipment. See our application guide for step-by-step instructions.

In many cases, yes. Flametect C-WD+ has been tested on solid absorbent wood panels with a nominal thickness of 12 mm. This is the minimum thickness recommended to achieve the tested level of performance.

9mm MDF has been tested to Euroclass C S2 D0. Absorbent timber-based materials can be treated with Flametect C-WD+ to improve their fire performance. Flametect C-WD+ has been tested to BS 476 Class 0 & Class 1 and EN 13501-1 Euroclass B-s1,d0 when applied correctly to suitable substrates.

Yes. Timber beams, exposed roof structures, decorative woodwork and fireplace beams can often be treated with flame retardant products. Flametect C-WD+ is suitable for many interior timber applications, including exposed structural and decorative timber.

Check with building control or your architect for compliance.

Yes. Timber sheds, cabins and outbuildings can be treated with Flametect C-WD+. Where weather protection or decorative finishes are required, a compatible water-based varnish or paint may be applied over the treatment.

Contact us for details.

Yes. Flame retardant treatments can significantly reduce flame spread and help prevent rapid fire development on treated surfaces. While no treatment can guarantee that ignition will never occur, they can provide valuable additional time for occupants to react and for firefighting measures to be taken, potentially reducing damage and improving safety.

Yes. Flametect C-WD+ is suitable for both interior and exterior timber applications.

In most cases, yes. Use Flametect C for natural materials or Flametect Nitro for synthetics and blends. For curtains, Flametect Nitro works on most fibre types to achieve BS 5867 Part 2 Type B and other international standards.

Floor coverings have been tested to BS EN 13501-1 Euroclass Bfl S1.

Yes. Most materials can be treated. We are the sole supplier of fire retardant treatment to a major international hotel group. Flametect Nitro products are skin-friendly and suitable for guest-contact textiles.

Yes, for most absorbent materials. We supply British theatres and opera companies, including The National Theatre. Flametect Nitro treats both synthetic and natural stage materials.

Yes. We supply design departments and retail environments to help meet BS 476 or BS 5867 standards. Contact us for advice on your specific materials.

Yes, with reservations. Flametect Nitro is skin-friendly and the treatment is dry-clean durable to 10 cycles. Retreat garments after any wet laundering or heavy wetting by weather or other means.

In many cases, yes. Always test a small, inconspicuous area first. Flametect Nitro will not react with metallic yarns found in antique and heritage textiles.

Yes. Flametect Nitro is highly effective and skin-friendly, making it suitable for soft furnishings in care homes, nurseries and children's bedrooms.

Flametect C can corrode metallic components. Where zips, buttons or metallic fasteners are present, use Flametect Nitro.

This depends on the materials used. Flametect Nitro can work on absorbent synthetic and natural fibre foliage and decorations. Always test performance independently to ensure the required performance is achieved. We do not certify artificial flowers due to the variety of materials used.

Yes. For absorbent paper and card, Flametect C is widely used on paper for art projects, table decorations and event props.

Yes. Even low-cost textiles can be made flame retardant to BS 5867 Part 2 Type B standards using Flametect Nitro.

In most cases, yes. Flametect Nitro D is water-resistant and can be applied to the interior surfaces of natural cotton canvas and blended marquee and tent materials.

Yes. Use Flametect Nitro on internal fabrics. We also supply intumescent paints for wood, GRP and steel structures. For marine and super yacht applications, we operate worldwide using Flametect NX2 technology.

Contact us by telephone for specialist products. Some flame retardant formulations can include natural silver anti-microbials for medical environments.

If ordered before 3:30pm, goods are normally dispatched the same day for next working day delivery. See our delivery page for full shipping options and international delivery information.

Yes. We ship internationally using FedEx, DHL and TNT. We have completed projects in Mexico, China, Kuwait, USA, Spain and across the Middle East. Email us for an international shipping quote.

Yes. All orders are processed using secure payment providers. Your card details are encrypted and never stored on our servers.