Flametect Nitro for Synthetic & Natural Textiles
-
BS 5867 Part 2 Type B
-
BS 5438 Tested
-
UK Manufactured
-
9 International Standards
-
Bromine & Halogen Free
What is this product?
How Flametect Nitro Works
Flametect Nitro works by penetrating absorbent textile fibres and depositing flame-retardant chemistry deep within the material structure. When exposed to flame or intense heat, this chemistry disrupts the combustion process, reducing the rate at which the fabric ignites, limiting the spread of flame across the surface and suppressing smoke production. The result is a treated material that behaves very differently in a fire, without any visible change to its appearance in normal use.
The formula dries completely clear, has no detectable odour once dry, and does not alter the feel, drape or colour of treated fabrics. It is non-corrosive to metallic threads, trims, zips and hardware, making it safe for use on a wide range of garments, furnishings and specialist textiles. Developed and manufactured in the UK by Eco-Sol Ltd in partnership with a Queen's Award for Enterprise-winning chemical manufacturer, every batch is produced to ISO 9001 standards.
Flametect Nitro contains no bromine, halogens or formaldehyde. This is increasingly significant as EU and UK regulators move toward restricting aromatic brominated flame retardants, which are linked to endocrine disruption, neurotoxicity and environmental persistence. Flametect Nitro achieves the same certified fire performance through a safer chemical mechanism, with no compromise on results.
Key Benefits of Flametect Nitro
- Dries completely clear — no residue, sheen or change to the fabric's appearance or texture.
- Non-toxic and skin-friendly — neutral pH formula tested as non-irritant, safe for guest and skin contact textiles.
- Bromine and halogen free — no toxic gases produced on combustion, no environmental persistence, compliant as EU restrictions on brominated flame retardants tighten.
- Broad material compatibility — works on natural fibres, synthetics, blends, foams, paper, card and many decorative materials.
- High active solids content — active solids deliver stronger performance with less product required.
- Dry-clean durable — flame retardancy lasts up to 10 dry-clean cycles; re-treat after wet washing.
- Non-corrosive — safe on metallic threads, trims, zips, buttons and hardware.
Typical Applications
- Curtains and drapes, including theatre stage and wing curtains
- Stage props, flat sets and scenery
- Theatrical costumes and party clothing
- Boat beds, bunks and curtains
- Aircraft seating and carpets
- Artwork, paper and card
- Artificial grass, including astroturf
- Papier mache projects and collages
- TV and film special effects
- Natural and artificial Christmas trees, decorations and costumes
- Tapestries and wall hangings
- Banners and signs for internal use
- Rugs and carpets, including synthetic carpets
- Temporary fireproof barriers
- Retail displays
- Wallpaper and coverings
- Hay and straw internal scenery
- Foams and sponges
What Flametect Nitro Cannot Do
The material must be absorbent for the treatment to penetrate and work effectively. It is not suitable for:
- Non-absorbent or impermeable materials
- Artificial flowers — results vary widely, always test a sample first
- Previously treated, coated or sealed surfaces
- Materials that cannot tolerate moisture during application
Re-treatment is required after any wet washing. Coverage will vary depending on textile weight and porosity — heavier or denser fabrics will absorb more product per m².
Not sure if Flametect Nitro is right for your material? Contact our team for free advice, or call us on 02920 026582.
-
Bromine and halogen free — no toxic gases produced on combustion, no environmental persistence, fully compliant as EU restrictions on brominated flame retardants tighten
-
Dries completely clear — no residue, sheen or change to the fabric's appearance or texture
-
Non-toxic and skin-friendly — neutral pH formula tested as non-irritant, safe for guest and skin contact
-
Broad compatibility — works on natural fibres, synthetics, blends, foams, paper, card and many decorative materials
-
High active solids content — 30% active solids deliver stronger performance with less product required
-
Dry-clean durable — flame retardancy lasts up to 10 dry-clean cycles
-
Free Statement of Performance certificate included with every order
Specifications & Documents
Full technical data and downloadable certification for compliance records.
| Product Code | FN750 |
| Suitable For | Curtains, drapes, stage textiles, costumes, upholstery, carpets, foams, paper and decorative materials |
| Finish | Dries clear — no residue, sheen or change to appearance |
| Use | Interior and exterior absorbent textiles |
| Application Method | Spray, roller, brush or immersion |
| Fire Classification | BS 5867 Part 2 Type B — BS EN 13773:2003 Class 1 |
| British Standard | BS 5438 — BS 5852 Parts 0 & 1 |
| VOC Content | Water-based, non-toxic, neutral pH, non-hazardous |
| Shelf Life | Use within 12 months of purchase |
| Coverage | 10.0 m² per litre |
Flametect Nitro for Synthetic & Natural Textiles — Product Overview
Which Do You Need?
|
Flametect Nitro for Synthetic & Natural Textiles
This product
|
Flametect CWD+ Clear Flame Retardant for Wood
Alternative
|
|
|---|---|---|
| Best for | Curtains, drapes, stage textiles, costumes, upholstery, carpets, foams, paper and decorative materials | Cladding, decking, log cabins, sheds, timber structures and partitions |
| Finish | Dries clear — no residue, sheen or change to appearance | Clear, natural appearance — no discolouration or sheen |
| Interior / exterior | Interior and exterior absorbent textiles | Interior & exterior |
| Water resistance | Suitable for damp and outdoor conditions on absorbent textiles | Weather-resistant, BS EN 927-6 accelerated weathering tested |
| Substrate | Natural, synthetic and blended textiles, foams, paper, card and absorbent decorative materials | Absorbent wood & timber |
| Fire classification | BS 5867 Part 2 Type B — BS EN 13773:2003 Class 1 | EN13501-1 Euroclass B s1 d0 |
| British standard | BS 5438 — BS 5852 Parts 0 & 1 | BS476 Class 0 & 1 |
| Application method | Spray, roller, brush or immersion | Brush, roller, spray or immersion |
| Formula | Water-based, non-toxic, neutral pH, non-hazardous | 100% water-based, VOC-free, non-toxic |
Not sure which applies to your project? Call us on 02920 026582 — our team can recommend the right product in minutes, free of charge.
How to Apply
Simple application with standard tools — no specialist equipment required.
-
1Prepare the materialEnsure the fabric or material is clean, dry and free from any existing coatings, sealants or finishes. Remove dust and loose fibres. Test a small hidden area first if unsure about compatibility.
-
2Apply evenlyApply using a spray, roller, brush or by immersion. Work across the material in controlled, light passes rather than heavy saturation — the aim is even penetration, not surface soaking. Ensure full coverage with no missed areas.
-
3Allow to absorbAllow the product to fully absorb into the material. Heavier or denser textiles may require more product. Do not over-apply — excess product sitting on the surface will not improve performance.
-
4Dry naturallyAllow treated items to dry in a well-ventilated area. Most materials are ready within 2–3 hours at room temperature. Do not tumble dry or apply heat during drying.
Coverage Guide
Certifications for This Product
Every claim is backed by independent, UKAS-accredited test data.
-
🛡️BS 5867 Part 2 Type BThe primary UK standard for flame retardancy of curtains and drapes. Type B is the higher performance category, required by hotels, theatres, care homes and public venues. Tested on multiple fabric types.
-
🏅BS 5438 TestedTests resistance to ignition from a small flame applied to the bottom edge of a hanging textile — the most common real-world ignition scenario for curtains and drapes. Tested by BTTG in 2023, result: Pass.
-
🇬🇧UK ManufacturedDeveloped and manufactured in the UK by Eco-Sol Ltd in partnership with a Queen's Award for Enterprise-winning chemical manufacturer, in an ISO 9001 quality-assured environment.
-
🌍9 International StandardsTested to French M1, German DIN 4102, USA NFPA 701, California Fire Marshal Title 19 Section 1237 (CalFire approved), BS EN 13773:2003 Class 1, BS 5852 Parts 0 & 1, and MCA & IMO maritime standards.
-
🌿Bromine & Halogen FreeContains no bromine, halogens or formaldehyde. As the EU moves toward restricting aromatic brominated flame retardants under REACH, Flametect Nitro offers a compliant, future-proof alternative with no health or environmental compromise.
Frequently Asked Questions
Can't find what you're looking for? Call us on 02920 026582 or use live chat for free expert advice.
No. Flametect Nitro dries completely clear with no residue, sheen or change to the colour, texture or drape of treated materials. Once dry, the treated fabric is indistinguishable from untreated fabric in normal use.
Yes. The formula has a neutral pH and has been independently tested as non-irritant. It is widely used in hotels, care homes and nurseries on guest-contact textiles including bedding, curtains and upholstery.
Flametect Nitro works on most absorbent natural, synthetic and blended textiles including cotton, linen, wool, polyester, nylon, viscose, velvet, muslin and many mixed-fibre fabrics. It also works on foams, sponges, paper, card, hay, straw and many absorbent decorative materials. The material must be absorbent — non-porous or impermeable surfaces will not absorb the treatment.
Flame retardancy is durable through up to 10 dry-clean cycles. Re-treatment is required after any wet washing, heavy rain exposure, or if the material has been significantly worn or abraded.
Yes. Apply by spray using a pump or trigger sprayer, working in even, overlapping passes to ensure full coverage. Allow to dry in place with adequate ventilation. Avoid spraying near furniture, flooring or surfaces that could be affected by overspray.
Coverage is typically 7–10 m² per litre depending on the weight and porosity of the material — lighter fabrics cover more, heavier or denser textiles absorb more product. Use our coverage calculator above for a specific recommendation based on your area.
Yes — a bespoke Statement of Performance certificate is included free with every order. Full test certificates and Safety Data Sheets are also available to download from the Documents section above.
Yes — this is one of the most common professional applications for Flametect Nitro. It is used by theatres, opera companies, hotels, schools, care homes and public venues across the UK to meet fire safety compliance requirements. If you need a specific standard met for your venue or application, call us on 02920 026582 and we can advise on the correct product and application method.
What Our Customers Say
Verified reviews collected via eKomi — independently moderated and genuine.
-
★★★★★
Gave them a ring to ask for some advice, was pointed to exactly what I needed and how much. Arrived promptly and has performed perfectly.
Verified purchase · 2 weeks ago -
★★★★★
Very quick response to query and fast delivery. Easy to use product with good instructions. Great company. Will use again.
Verified purchase · 1 month ago -
★★★★★
Excellent product with swift delivery. Easy to top up fire retardancy after the deck was cleaned. Looks completely untreated which was exactly what we wanted.
Verified purchase · 1 month ago